 |
|
 |
|
| |
| |
Repeat the instructions for making the small airsoft guns 4 times so you wind up with 4 mini airsoft guns. It is important to make sure the airsoft guns are uniform. |
| |
With the mini airsoft guns made we will need to attach them together side by side. We will be using hot glue to make 2 modules exactly the same composing of 2 airsoft guns each. |
|
After the airsoft guns are glued together wire the 2 guns together in parallel (not series). Imbed the wires in the gap between the guns and use hot glue to secure the wires. Don’t build up the glue above the height of the base or they won’t stack well. |
|
Take the 2 modules and glue them together staggered so there is .75 inch of the lower gun exposed so its possible to feed ammo down to the lower gun. |
|
Using hot glue fill any gaps in the front of the newly created quad cannon so it’s as smooth as possible. This will help with the balls feeding into the gun and prevent jamming and slow feeding. |
|
Using the Plexiglass peaces to build a box around the front of the turret. Mark and drill holes in the front panel for the barrels to poke through. Next build up the height of the turret so there is room for the balls to feed into the top. |
|
|
|
|
